This specialist cleaner was designed to restore very old
or badly stained tiles to their original condition before
any further treatment. It removes grease, wax, oil,
polishes, varnish, paint tar, ground in dirt and old solvent
sealer that have built up on the surface over time. It
rejuvenates the colour and texture of the tiles and any tile
treated will look cleaner and brighter.
This product should be looked upon as a last resort
treatment. One will find that less harsh products from
the SMP Range will more than lightly be suffice to
remove any soiling from most surfaces. However SMP Heavy
Duty Tile Cleaner when used will prove very effective.
Caution should be taken whilst using this product as it is
Flammable and also has quite a potent odour. As this
product is very volatile only a small area at a time should
be treated with the residue being removed as soon as
Directions for use
Apply directly to the surface to be treated and allow to
stand for 5 minutes. Agitate the surface with a stiff brush
and remove the residue as soon as possible as it will
solidify back to its untreated state very quickly. This
process may have to be repeated in some cases. When you are
confident that the floor is clean give it a final rinse over
with clean water to remove any small residues that may still
be prevalent. Allow the surface to dry thoroughly before any
further treatments are applied to the it.
To keep the floor looking like new for longer use only
SMP. Ceramic Tile Cleaner or other suitable product from
the SMP. Maintenance range as these will clean
without leaving build ups on the floor like some other
household cleaners which in turn can become dull and
1 Litre will clean approximately 10 - 15 sq.metres of
Technical information and C.O.S.H.
See relevant notes at the back of this Product Guide.
Always test this product on a small inconspicuous area first
to ensure compatibility