This high quality solvent
based sealer was designed to seal, protect and enhance the
colour of natural terracotta when being fitted, leaving a
tough durable easy clean rich gloss finish.
It contains high quality
acrylics in a solvent base whish leaves an extremely hard
wearing, durable finish that will actually increase the slip
resistance of the surface leaving it impervious to acid,
alkali, oil, grease, soap and water making it ideal for
domestic or commercial applications.
Directions for use
After tiles have been
fitted but before grouting they should be cleaned thoroughly
using SMP Heavy Duty Residue Remover added to the
wash water to remove any adhesive or cotta dust residues,
following the instructions carefully. When totally dry apply
sealer liberally until a uniform gloss finish is achieved.
This sealer is touch dry in approx.12 hours but cures over
the following 3-4 days during which time heavy traffic
should be avoided to achieve the best results. We recommend
that the customer apply 2-3 thin coats of SMP. Tough Coat
Gloss to the floor after grouting to give a harder
wearing easy to maintain surface.
To maintain the sealed
surface only use SMP Sealed Floor Maintainer as the
regular cleaning agent as this will prolong the life and
appearance of the sealed surface. SMP Wash and Shine
should be used when required to promote a rich gloss
appearance after wear. Using these products will greatly
prolong the need for time consuming restoration.
We recommend that the
sealed floor be stripped back when required using SMP
Sealed Floor Stripper and then re-sealed as above to
keep tiles in pristine condition.
Approx 10sq.m per litre
applying 2 coats
Technical information and
See relevant notes at the
back of this Product Guide.
Always test this product on a small inconspicuous area first
to ensure compatibility