Description

This high quality solvent based sealer was designed to seal, protect and enhance the colour of natural or artificial stone surfaces, quickly and easily, leaving a tough durable easy to clean natural matt finish.

 

Properties

This is a sty rite sealer which is non silicone based and uses only white spirit as its carrier. As a result of this any over application or spillage can be easily removed using a cloth dampened in white spirit. This sealer will increase the slip coefficient on the surface as well as protecting it from acid, alkalise, oil, grease, soap and water, making it ideal for domestic or commercial applications.

 

Directions for use.

After tiles have been fitted but before grouting they should be cleaned thoroughly using SMP. H.D.Residue Remover or SMP. Intensive Clean added to the wash water, to aid the removal of any adhesive or dust residues, following the instructions carefully. When totally dry a single coat of this sealer can be applied and allowed to dry over night. After grouting repeat instructions as above and apply a second coat of sealer. This sealer is touch dry in 2-3 hours and ready for heavy traffic in approx 24hours.

 

Maintenance

To maintain the sealed surface use only SMP. Sealed Floor Maintainer as the regular cleaning agent as this will prolong the life and appearance of the sealed surface. SMP Tough Coat Gloss or SMP. Wash and Shine may be used on top of this sealer if and when required, to promote a rich gloss appearance. Normally after a period of time the floor will dull due to wear and tear and will benefit greatly from such a treatment.

 

Restoration

We recommend the sealed floor be stripped back when required using SMP. Sealed Floor Stripper and then re-sealed as above to keep the tiles in pristine condition.

 

Coverage

Approx 10sq m per litre depending on porosity. N.B This sealer is for both interior and exterior use

Technical information and C.O.S.H See relevant notes at the back of this Product Guide.

** NB Always test this product on a small inconspicuous area first to ensure compatibility **